Miscellaneous shop tools
|Code||Name - Description||Image||Price|
Transmission MAGNET, Square
Magnet fits in most pans
Traps fine metal shavings
Approx 1" L x 3/4" W
Assemblee Goo, Green Transmission Assembly Lube
YOU NEED THIS ON EVERY REBUILD
ASSEMBLEE GOO is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engines!). It provides lubrication and helps facilitate the assembly process, by holding components such as needle bearings and hydraulic seals in place. Simply apply to O-rings, seals, bearings, gaskets, sealing rings, bushings, thrust washers and much more.
Provides your choice of tack strength, firmer (GREEN) great for summer months and lighter tack (BLUE) great for winter months
No water/soapy residue to contaminate new automatic transmission fluid
Dyed green or blue to prevent misdiagnosing leaks
Will not melt at shop temperatures
Not harmful with prolonged skin contact
Will not clog filters
Dissolves quickly at operating temperatures
Proprietary green formula contains rust inhibitor
Compatible with all transmission fluids
Air Blow Gun Replacement Tip [for T-1010-B]
Tool, Universal Front Pump Clearance
H type gauge
Tool, Pump Remover, Heavy Duty
Use on conventional type pumps only
Tool, Universal Seal Puller
Keeps transmission fluid from leaking out while removing the transmission
Tool, Parts tray
Plastic parts tray, 13.5 x 18
Tool, Valve Body parts tray
Plastic parts tray, 13.5 x 18
Tool, TF6 & TF8 DRILL & TAP Guide
Tool, Pump alignment band - Large pumps
Tool, SHIFT LINKAGE Remover/ Installer (PLIER TYPE)
Tool, VERNIER CALIPER INCH/METRIC
Tool, 4 inch Air gun w/o tip
also order RP-1010 -Air Blow Gun Replacement Tip [for T-1010-B]
Tool, AIR HOSE 25 FT COIL
Tool, Chrysler- Cooling Line Disconnect Tool, Quick connect release
Quick connect release for both 3/8 & 1/2 lines.
RWD vehicles most 1997 up
Tool, Pump Alignment UniversalReplaced by T-0222 GM AND CHRYSLER and T-0222-A FORD*CALL FOR AVAILBIL
Replaced by T-0222 GM AND CHRYSLER and T-0222-A FORD
Ford- Transmission Oil Cooler & Fuel Line Disconnect Tool
Removes push lock connectors found at the radiator and transmission connections on 1983 through current Fords and 1982 Continental overdrives.
GM Transmission & Engine Oil Cooling Line Disconnect *OUT OF STOCK
(1 tool) GM-Jiffy Tite-Transmission & Engine Oil Cooling Line Disconnect.
This new disconnect tool allows for quick and safe disassembly and reassembly of most GM - 4L60E, 4L80E and 4T80E 3/8 inch. and 1/2" transmission and engine oil cooling lines.
Use of the tool will allow for quick change without damaging the tube or the retaining clip - saving you time.
Tool, DRAIN PLUG Kit
Tool, 23 piece universal seal driver kit
Automatic & Standard transmissions and other seal driver applications.
Tool, Bench buddy kit
Superior Bench Buddy (Superior BB100 )
Impregnated with a special super fine abrasive, Bench Buddy brushes easily remove small burrs and polish the inside of a valve bore with virtually no enlargement of the bore diameter itself. Each Bench Buddy kit features 4 different sized brushes. * Improves the surface finish of a bore by up to 50% * Restore smooth valve operation in seconds * Services bores from 1/4 to 1
Pump Alignment Tool various GM AND CHRYSLER